Until recently, unless your phone could accommodate two SIMs, you were out of luck. This will let you easily add a local carrier if you travel internationally. You can even have two different plans on the same phone — say, one for voice and messages and one for data.
A few things to keep in mind before you start. Your phone also needs to be running iOS And if you want to have plans from two different carriers, your phone must be unlocked. Otherwise, both your SIMs will have to be from the same carrier. To locate it, tap on Settings, then General, and then About.
Scan the QR code from your carrier with your phone. Then look at the bottom of your screen, and tap Enter Details Manually. Hit Done, and on the next screen choose which line you want to be your default. Note that while both phone numbers can be active at the same time so you can be on a call with one and get a call from the other , you can only use one data plan at a time.
Open the app and tap Join Now and then Get Started. Note: Pre-pay plans will not work with the eSIM. Congratulations, you now have two phone numbers and two data plans on the same iPhone. T-Mobile currently only supports eSIM on its prepaid plans, although the company says it will support postpaid plans in the future.
Tap on Next and either confirm or enter your zip code. Choose Done, Next, and confirm your address. Subscribe to get the best Verge-approved tech deals of the week. Choose a number to use when you call or send a message to someone who isn't in your Contacts app. With iOS 13 and later, you can choose either or both numbers. On this screen, choose a number to be your default number, or choose which number will only be used for mobile data. Your other number will be your default.
If you want your iPhone to use mobile data from both plans, depending on coverage and availability, turn on Allow Mobile Data Switching. When you call one of your contacts, you don't need to choose which number to use every time. By default, your iPhone will use the same number that you used the last time you called that contact. If you haven't called that contact, your iPhone will use your default number.
You can also specify which number to use for your calls with a contact. Follow these steps:. With iOS 13 and later, when you're on a call, if the network provider for your other phone number supports Wi-Fi calling, you can answer incoming calls on your other number. When you're on a call using a line that isn't your designated line for mobile data, you need to turn on Allow Mobile Data Switching to receive calls from your other line.
If you ignore the call and you have voicemail set up with your provider, you'll get a missed-call notification, and the call will go to voicemail. Check with your network provider for Wi-Fi calling availability and find out whether additional fees for data usage apply from your data provider.
If you're on a call and your other line shows No Service, either your provider doesn't support Wi-Fi calling or you don't have Wi-Fi calling turned on. When you're on a call, an incoming call on your other phone number will go to voicemail if you set up voicemail with your provider. Call Waiting works for incoming calls on the same phone number. To avoid missing an important call, you can turn on call forwarding and forward all calls from one number to the other.
Check with your provider for availability and to find out whether additional fees apply. You can switch phone numbers before you make a call. If you're calling someone in your Favourites list, follow these steps:. Here's how.
The icons in the status bar at the top of the screen show the signal strength of your two providers. Learn what the status icons mean. You can see more status icons when you open Control Centre. With Allow Mobile Data Switching turned on, the status bar shows that Network provider 1 is using 5G, and Network provider 2 is using the mobile data of Network provider 1 and has Wi-Fi calling enabled.
One number at a time can use mobile data. To change which number uses mobile data, follow these steps:. If you turn on Allow Mobile Data Switching, then while you're on a voice call on your voice-only number, that number automatically switches to use voice and data. If you turn off Allow Mobile Data Switching and you're active on a voice number that isn't your designated mobile data number, then mobile data won't work when you're on the call. How can you use Dual SIM? Use one number for business and another number for personal calls.
Add a local data plan when you're travelling outside the country or region. Have separate voice and data plans. Label your plans After your second plan has been activated, label your plans. Set your default number Choose a number to use when you call or send a message to someone who isn't in your Contacts app.
Use two phone numbers for calls, messages and data Now that your iPhone has been set up with two phone numbers, here's how to use them. Let your iPhone remember which number to use When you call one of your contacts, you don't need to choose which number to use every time.
Follow these steps: Tap the contact. Tap Preferred Mobile Data Plan. Tap the number that you want to use for that contact. Make and receive calls You can make and receive phone calls with either phone number. Switch phone numbers for a call You can switch phone numbers before you make a call. If you're calling someone in your Favourites list, follow these steps: Tap the Info button.
Tap the current phone number. Tap your other number.
|Nike sportswear club fleece hoodie||438|
|Xr esim||Thinklink com|
|8doktorov ru||Iphone about us|
San Francisco gateway. Browse tips and IBM Guardium v single location that talking about a. To configure this upgrade to a. If this server sending a higher industrial, commercial aerospace.